X'inhi d-differenza bejn liga 625 u 825?
Differenza fil-proprjetajiet mekkaniċi ta 'Incoloy 825 vs Inconel 625
| Pfroperties mekkaniċi | Incoloy 825 | Inconel 625 |
|---|---|---|
| Densità | 8.14 mg / m3 | 8.44 g / cm3 |
| punt ta 'tidwib | 1370-14000C | 1290-13500C |
| Firxa ta 'permeabilità f'200 Oersted fi 15.9 ka / m | 1.005 | 1.0006 |
| Valur tat-Temperatura Curie f '0 c | < -196 | -196 |
| Qawwa tat-tensjoni fl-MPA | 586 | 827 |
| Qawwa tar-Rendiment fl-MPA | 241 | 414 |
Speċifikazzjonijiet Internazzjonali ta 'Incoloy 825 u Inconel 625
| Speċifikazzjonijiet | Incoloy 825 | Inconel 625 |
|---|---|---|
| Numru UNS | No8825 | No6625 |
| Numru WNR | 2.4858 | 2.4856 |
Werrej kimiku ta 'Incoloy 825 u Inconel 625
| Kontenut kimiku | Incoloy 825 | Inconel 625 |
|---|---|---|
| Ni | 38.00-46.00% | 58. 00% min. |
| Cr | 19.50-23.50% | 20.00-23.00% |
| Mo | 2.50-3.50% | 8.00- 10.00% |
| Fe | 22. 00% min | 5. 00% max |
| NB + TA | - | 3.15-4.15% |
| Ko | - | 1. 00% max |
| Al | 0. 20% max | - |
| Si | 0. 50% max | 0. 50% max |
| Mn | 1. 00% max | 0. 50% max |
| Ti | 0.60-1.20% | 0. 40% max |
| Ag | - | 0. 40% max |
| C | 0. 05% max | 0. 10% max |
| S | 0. 03% max | 0. 01% max |
| P | - | 0. 01% max |
| Cu | 1.50-3.00% | - |
